i just did the new firm ware and the camera works perfect sending a pic manually. But when you put it to on, it never takes a pic and sends. anybody ran across this?
steadystreamin Did you do an over the air firmware update or manual? Are the pictures on the memory card and just not sending or not even on the memory card.
oh i didnt pull the card to see. i guess it could still be taking them. i did the firmware manually off a sd card.
steadystreamin
You don’t have to pull the card. When the camera comes up, press the playback button and you’ll be able to see the pictures.
This exact thing happened to me the other day but I did not do a firmware update. In the set up position the camera will take and send a test pic fine but will not send one when switch is put to on from setup to on. The only way I solved this was to put the camera to on. Camera will not send the picture if you go from set up to on. It has to be from off to on.
Ok so after the hunt i took the camera with me, it took some pics but never sent them. Tried a manual send again when i got home and it went through. So i will try to off to straight on and see if that helps.
works like a charm now. turn from off to straight on, don't stop on setup.
Try a new memory card, that's what seemed to be causing the issues for coatue65 . Make sure it's a class 10 and no larger than 32gb, 16 is even better. Be sure to format the card in the camera.
Weird, huh?
Yes, a different class 10 card solved all my problems.